10K_6SSP_3_3m - 10K Type-II Thermistor Temperature Sensor with 3in Stainless Steel Probe and 3m wire slave i/o device MIL217F at 25°C environment ground

MIL217F at 25°C environment ground fix)

*** NOTE:  The Barix IPAM-101 has been discontinued

This 10k Thermistor Temperature sensor has a 3inch long stainless steel probe with an 8mm diameter and a built-in 10K ohm resistor bridge

There is a DS18B20 chip potted in the tip of the probe which is connected to a durable jacketed cable with 2 heavy stranded conductors

10K_6SSP_3_3m - 10K Type-II Thermistor Temperature Sensor with 3in Stainless Steel Probe and 3m wire slave i/o device MIL217F at 25°C environment groundPart #: 10K_6SSP_3_3m The 10K_6SSP_3_3m sensor has a 3 inch long Stainless Steel Probe with a 6mm diameter and a 3 meter cable. It uses a 10K Type II thermistor element that is epoxied into the tip of the Stainless Steel probe resulting in a sensor that is quite sensitive and responds quickly to changes in the temperature. The sensor element used is a 10K Thermistor and can be used with many popular brands of DDC manufacturers. Cable temperature